Page 2 of 6 | 03112015
User Manual: Portable Mist Units | English
READ ALL INSTRUCTIONS BEFORE OPERATING EQUIPMENT
Model No.: MU-10N-2, MU-10NK-2, MU-10NV-2
WARNING
PROTECT THE ENVIRONMENT
Please dispose of packaging materials, old machine
components, and hazardous fluids in an environmentally safe
way according to local waste disposal regulations.
Always remember to recycle.
*Specifications and parts are subject to change without notice.
Specifications:
Liquid Temperature ....................... 40˚F to 100˚F (4.4˚C to 37˚C)
Droplet size: .................................. 20 microns at 50 psi
1 liter of solution will cover approximately 1000 cubic feet (up to
system max of 38,000 cubic feet).*
A full tank of solution will supply the unit for approximately 1.5
hours.*
*NOTE: Area covered and run time may vary based on humidity,
air flow, and product used.
Dimensions and Weight:
Length: ....................................... 19 in (482 mm) approximately
Width: ........................................ 16 in (406 mm) approximately
Height: ....................................... 42 in (1066 mm) approximately
Weight (empty): ......................... 31 lbs (14 kg ) approximately
Requirements:
Air pressure required: 50 psi (3.4 bar)
Air volume required: 7 CFM at 50 psi (198.3 l/min at 3.4 bar)
Chemical Requirements: Follow all instructions from chemical
manufacturer and Safety Data Sheet (SDS).
Air Operated Double Diaphragm Pump Models Offered:
P56: Polypropylene body with Santoprene diaphragm
P56V: Polypropylene body with Viton diaphragm
P56K: Polypropylene body with Kalrez diaphragm
Read this manual completely and understand the
machine before operating or servicing it.
• Read all instructions before installing or operating unit.
• Always wear appropriate personal protective equipment
(PPE) when operating or servicing unit.
• Follow all chemical safety precautions and handling
instructions provided by the chemical manufacturer and
Safety Data Sheet (SDS).
• Do not exceed an incoming air pressure of 100 psi (7
bar).
• Do not exceed a fluid temperature of 100˚F (37˚C).
• Only use clean and dry air. Air must be filtered and free
of moisture or pump life will be diminished. If needed,
install an air dryer before unit.
• Do not use air lubricator before the unit.