corresponding to the single function is the
"single"
key on the oscilloscope keypad. The single-shot function
is also a common function of the oscilloscope. For
example, when you need to observe the power-on
waveform of the crystal, if you do not use single, the
collected power-on waveform will flash. If you want
to analyze the power-on waveform, you need the
oscilloscope to stop automatically after acquisition.
The specific operation is: adjust the vertical scale of
the oscilloscope, and then click single (the oscilloscope
is in the
"wait"
state because there is no waveform at
this time), and then power on the circuit under test,
the waveform cross-domain trigger level generated by
the crystal oscillator, After the oscilloscope triggers,
it continues to complete a sample and then stops. At
this point you can drag and expand the waveform for
analysis. Of course, there are other applications besides
these, which will not be listed here one by one.
7. Reference waveform:
The reference waveform
is the waveform displayed in the previous frame latched
on the screen display, and the normal refreshed waveform
is not affected. Unlike the desktop oscilloscope,the
08
Summary of Contents for FNIRSI-1C15
Page 2: ......
Page 16: ...http www fnirsi cn...
