FMUSER INTERNATIONAL GROUP INC.
广州市汉婷生物技术开发有限公司
8
/
14
CHAPTER 3 Operations and Management
FUTV4624 is controlled and managed through the key board and LCD display.
LCD Display –
It presents the selected menu and the parameter settings. The backlight in the display is on when the power
is applied.
LED –
These lights indicate the working status
l
Power: It lights on when the power supply is connected.
l
Alarm: It lights on when the there is error, such as the signal source loss.
l
USB: It lights on when the USB properly connected and detected.
Left/Right/Up/Down buttons –
Use these buttons to turn the screen pages, shift the target items by moving the triangle, or
change the parameter settings in the program mode.
Enter –
Use this button to enter a submenu or save a new setting after adjustment; press it to start adjusting the value of
certain items with Up/Down buttons when the corresponding underline flash;
Press it to activate the hidden selections and change the setting with Up/Down (or Left/ Right) buttons.
Menu –
Press this button to step back
Lock –
Locking the screen / cancelling the lock state, and entering the main menu after the initialization of the device. After
pressing lock key, the system will question the users to save present setting or not. If not, the LCD will display the current
configuration state.
When the power is connected, the LCD will start to initialize the program. The LCD menu goes as below chart.
