FMUser FUTV4443A-10, User Manual

Page: 18 / 39

FMUSER INTERNATIONAL GROUP INC.
广州市汉婷生物技术开发有限公司
18 / 39
Hereby we just take Output 1 as an example to illustrate.
User can choose output 1 in the submenu by pressing ENTER, and the display
shows as below:
Under the following submenus, there are parameters which can be set manually; user
can press “Up/Down” to choose this item. “Enter” and “Left/Right” to set the
parameters. The system displays following pages.
►
3.1.1 Output Carrier 3.1.2 Attenuation
3.1.3 NIT Insertion 3.1.4 Output Stream
3.1.1 Output Carrier
*On Off
3.1.2 Attenuation
00.0 dB
3.1.3 NIT Insertion
On *Off
►
3.1.5 Trans Stream 3.1.6 Out Address
3.1.7 Out Port 3.1.8 Out IP Enable
►
3.1.9 Srv Address 3.1.10 Srv Mask
3.1.11Srv Gateway 3.1.12 Srv Mac Add
Choose to turn on
the carrier of
output 1’ or not.
Choose to inserted
NIT table or not.
3.1.4 Output Stream
054.000 Mbps
3.1.6 Out Address
224.002.002.003
3.1.7 NIT Insertion
On *Off
3.1.5 Tran stream ID
00000
3.1.8 Out Port
01001
3.1.9 Srv Address
192.168.000.124
Attenuation is from
0~16db in 0.5db step.