- 2 -
STL10
FM STL TRANSMITTER / RECEIVER
INTRODUCTION
The STL10-xxT is a solid-state wideband FM Transmitter providing a continuously
variable RF output form 0 to 25 watts into a 50 Ohm load at many frequency within the
UHF/ VHF band in 10 kHz increments.
The STL10-xxR receiver uses the same synthesized oscillator as the transmitter. A
comb line band pass filter ensures image-frequency rejection exceeding 60dB. The
achieved sensitivity in mono is around 10mV per 60dB of SNR. low noise and distortion,
and high interference rejection.
With full range universal power input and built-in active PFC function. Those STLs can
operate on either 90 ~ 264VAC / 47~63Hz or 127 ~ 370VDC as mean power to suitable
most of Countries in the world.
Digital & Microwave System (D&M) has designed and manufactured broadcast
equipment since its incorporation in 2000. Our product line has consistently applied the
best in current technology to the specific needs of broadcasters.
FEATURES
z
Easy and direct programming of the frequency by LCD, Step 10 KHz.
z
Soft-start from RF mute status.
z
Adjustable power output from 0 to 25 W with automatic power control, maintaining the
output at any fixed level.
z
Available with External AUX/MPX input connectors.
z
Meets or exceeds all FCC and CCIR requirements.
z
High reliability provided by conservatively rated components.
z
Modular layout with Plug-in, easy replaceable circuits and parts.
z
Built-in stereo coder.
