FMUSER INTERNATIONAL GROUP INC. Forum: http://bbs.fmuser.com
10
/
26
3.1
Device Status:
1) Device ID
2) Device Version: The Firmware version.
3) Video info: Video signal parameters that
inputted in.
4) Interrupt Count: Increasing intervals
indicates it has video input. If it displays as 0, it
means there is no video input, then you need to
change the source box and HDMI cable for
check.
5) Lost Count: This figure is generally very
small, a large number of lost frames, the video
card, it is necessary to detect the input program
source is normal
6) Audio Status:
7) Audio Count: Increasing audio count it has
3.5mm input. If it displays as 0, it means there is
no video input, then you need to check the input
signal.
If you are an experienced user,for more
information about the counter.
Please go to
http://bbs.fmuser.com
3.2
Audio info
1) Audio input: C
urrently Audio input (
HDMI or line
in)
2) Audio sample(HZ):
3) Audio Channel :
4) Resample(HZ): disable / 32k /44.1k
5) Encode: AAC-LC / AAC-HE / MP3
6) Bit rate(bps):48000-256000bps
