_________________________________________________________________________________________________________________
_________
________________________________________________
Page 5 of 6
Using the FM Transmitter
1 Press
Power Button
to turn on the Digital Transmitter. The
LCD Digital Display
shows the pre-set radio frequency
channel (For example, 98.0MHz).
2. Turn on your radio and switch to FM channel, adjust the radio frequency channel to desired channel. Now the radio will
output as
“
zzz
”
sound or radio music now.
3. Then adjust the radio frequency channel of the Digital Transmitter to the same radio frequency channel of the radio. (For
example, if the radio frequency channel is set to 98.0MHz then the FM Transmitter should also be set to 98.0MHz). When the
radio frequency channel of the Digital Transmitter and the radio are same, the
“
zzz
”
sound will stop. Adjust the volume to
medium level in iPod or audio player, and start playing music. Now you will hear the music playing from the mp3 or audio
player will output from the radio.
Note: If volume level from mp3 or audio player is high, the music output from the radio will
sound distorted.
5. Adjust the volume in your radio until the satisfactory output is reached.
6. When interference occurs, the music from radio will not sound clear. In this case, please switch to different channels by
repeating Step 2 and 3 until the music sound quality is clear again.
Adjustment of Radio Frequency Channels
1.Press
Power Button
to turn on the FM Transmitter
2.Adjust the FM frequency channels: (Radio frequency channels adjustment range is 87.0MHz~108.0MHz.)
3.Press
Frequency Up/Down Button
to increase/decrease 0.1MHz radio frequency channels on the Transmitter.
4.Press and hold the
Frequency Up/Down Button
to continuously increase/decrease radio frequency channels on the
Transmitter.
Power On/Off and Power
Press
Power Button
turn off the FM Transmitter.
Important Notice
•
This product should be kept in dry condition and away from water.
•
Keep the product off direct sunlight or high temperature environment.
•
Please unplug the power plug when it is not in use.
Troubleshooting
1) If the FM Transmitter does not function normally,
•
Please check whether all wires/ cables being connected tight and correct.
•
If the product cannot be powered on, check whether the AC adapter works and connects properly.
2) If music output from the radio is distorted (not clear),
•
First, reduce volume from iPod or audio player to medium or lower volume range, and then turn up volume from radio to
desired level. The music sound quality should improve.
•
If the pervious method does not improve the music sound quality, it means the problem may be due to frequency
interference. Then you need to switch to other channel.
3) If the volume output from the radio is too loud when the FM Transmitter is not being in use,
•
When FM Transmitter is in used, desired volume output level from the radio is typically higher than without using FM
Transmitter. To prevent the volume output too loud when the FM Transmitter is not being in use, you can decrease the radio
volume and increase the iPod or audio player volume as long as the sound from the radio remains clear.
4) If music output from the radio have current acoustic interference,
•
Try to change the location of the transmitter, or change the location of the power supply, or change the location of the
audio line. Power supply must be away from the transmitter at work.
www.fmuser.org
