the working frequency of the machine required
frequency.
Special features of the setting and adjustment
1.Power Adjustment
The machine output power sub-two tranches:
Power profile (H):7W; low-power profile (L):1.5W
First of all, turn off the power adapter (or
disconnect DC12V), finished in the transmitter
power lines disconnected state, press and Hold
, And then connect the power adapter (that is,
DC12V connected to the transmitter), 3 seconds
after release the button, this time into the power
to adjust the state, LCD display shows "L" or "H":
Click "+", set to high power (H), according to "-",
set for low-power (L), select the desired power
profile, and then , Power is set, it will go
to set the frequency range of the state.
2.Frequency range setting
The completion of power set, will enter a
frequency range to set the state. Power setting
is completed, press the , LCD screen display a
group of frequency data, frequency data is the
work of this group of high-end frequency band. For
example, to set the operating frequency range from
90MHz ~ 100MHz, then at this time through the "+"
"-" button, adjust the frequency data is 100.00MHz,
band, high-end is set up, press , Will enter
the low-end frequency setting, LCD display data
for low-frequency band, through the "+" "-" button,
adjust the data for 90.00MHz, and then At this
time, is set up (note that band-band high-end
low-end can not be compared even higher), this
machine by default, within 87 ~ 108MHz to ensure
that all performance indicators, generally in the
83 ~ 115MHz can also be used normally, if the super
- they range, you need to modify the parameters
of the internal components.
3. Attention
(1)Before booting, be sure to had connect
the antenna. It is strictly prohibited empty boot.
