Operating Manual AZS01B and AZS04B
14.08.2018
7
5
Installation
5.1
Mounting the Sensor
The sensor will be mounted with two M4 screws to a bracket. The bracket itself is
fixed to the location rail or to the flange of the linear unit. The bracket varies de-
pending on system configuration (steering frame size, manual or motorized sensor
adjustment, etc.). It must be ordered separately.
5.2
Wiring
Fig. 2: Sensor Connector in front view with its pin assignment. The table lists the
wire colour corresponding to the signal names.
Pin_Assignment.ai
Electrical Connections:
If the sensor is used with a built-in web guide controller in the steering frame FMS-
webMASTER series, the sensor is connected with a cable 4x0.14mm
2
of the re-
spective length. Fig. 2 shows the sensor connector in front view with its pin as-
signment. The table lists the wire colour corresponding to the signal names.
