FMS 70 MM A-10 THUNDERBOLT II, Operating Manual

Page: 8 / 20

fig5 fig4
fig6
fig7
7
Horizontal and Vertical Stabilizer Installation
Model Assembly
1. Connect the rudder servo connectors to the servo extensions in the elevator .
2. Carefully slide the two vertical tail pieces (left and right) into the slots of horizontal tail as shown (fig4).
3. Secure the two vertical tail pieces (left and right) in place using the 4 screws included (fig5).
4. Connect the elevator servo connectors and rudder servo connectors to the servo extensions in the
fuselage.
5. Install the assembled horizontal tail and vertical tail to fuselage using the 4 screws included. Make sure
it is tightened enough.
HKM3.0*16
HKM3.0*16