background image

Introductions 
Contents of Kit 
Model Assembly    
Battery and radio installation 
Get your model ready to fly 
The transmitter and model setup 
Check the control throws 
Clevis Installation 
Control Horn and Servo Arm Settings
Center of Gravity(CG) 
Before flying the model 
Flying Course 
Trouble shooting 
Spare parts list content 
ESC instruction 

Table of Contents

Introductions

FMS is pleased to announce that all 64mm ducted fan aircrafts are being upgraded. Inspired by the superior 

features of the original model, F-18 version two (V2) has improved mechanical and structural features that will 

enhance air performance and decrease assembly time. 

The fiber pipe greatly enhances the wing strength for enhanced flying maneuvers. Improved main wing set and 

landing gear installation optimizes strength of structure and reduces assembly time. 

The latest 64mm ducted fan can achieve more than 800 grams of thrust. 

The differences in speeds between the V1 and V2 will be noticeable. If you possess the “need for speed,” 

accessories such as missiles can be removed to create a faster more streamlined model. 

Upgrades

    

495mm fiber pipe inserted through the fuselage and main wing

    

Use of four inner-hexagon screws instead of glue improves main wing set and landing gear installation optimizing 

strength of structure. 

    

New more powerful 64mm 11-blade ducted fan with up to 800 grams of thrust. 

    

New 2840-KV3150 motor

    

New Predator 40A ESC

    

The latest FMS EPO foam material creates stronger, more impact-resistant planes.

    

Environmentally friendly water-based paint minimizes blistering from sun.

    

Pre-installed newly designed control horns allows more throw. 

Features

    

350mm fiber pipe inserted through the fuselage and main wing

    

Improved main wing set and landing gear installation. optimizes strength of structure and reduces assembly time. 

    

64mm 11-blade ducted fan 

    

2840-KV3150 motor

    

Predator 40A ESC

    

5x 9g servos

    

The latest EPO foam material creating stronger, more impact-resistant plane.

    

Environmentally friendly water-based paint minimizes blistering from sun.

    

Pre-installed newly designed control horns allows more throw.

3

··························································································································3

························································································································4

······················································································································5

·····································································································9

·····································································································10

······························································································10

········································································································11

··················································································································12

·························································································12

·············································································································13

············································································································14

·······················································································································15

····················································································································16

···········································································································17

·····················································································································18

 

Summary of Contents for 64MM F-18 HORNET V2





















Reviews: