FMS 1400MM T-28 trojan v4, Operating Manual

Page: 9 / 16

9
The table shows the factory settings for the control horns and servo arms. Fly the aircraft at the factory
settings before making changes.
After flying, you may choose to adjust the linkage positions for the desired control response.
Control Horn and Servo Arm Settings
More control throw
Less control throw
Elevator
Rudder
Ailerons
Horns Arms
Check the control throws
Check the motor rotating direction
The motor should rotate clockwise when viewing the plane from the rear.
The suggested control throw setting for FMS MODEL are as follows (dual rate setting):
Tips: At first flight, fly the model in low rate. The first time you use high rates, be sure to fly at low to medium
speeds. High rates, as listed, are only for EXTREME maneuvering.
11
13
25
8
10
19