![background image](http://html1.mh-extra.com/html/fms/1220mm-super-ez-v2/1220mm-super-ez-v2_operating-manual_2313076013.webp)
Check the C.G. (Center of Gravity)
When balancing your model, adjust the motor battery as necessary so the model is level or slightly nose
down. This is the correct balance point for your model. After the first flights, the CG position can be
adjusted for your personal preference.
1. The recommended Center of Gravity (CG) location for your model is (55-60mm) forward from the
leading edge of the main wing (as shown) with the battery pack installed. Mark the location of the CG on
top of the wing.
2. When balancing your model, support the plane at the marks made on the bottom of the main wing with
your fingers or a commercially available balancing stand. This is the correct balance point for your model.
Make sure the model is assembled and ready for flight before balancing.
12
Secure the spinner base a, propeller b, spinner plate c to the motor one by one. Fix the propeller with spin-
ner cap d as the given spinning direction below.
55-60mm