16
17
4. Setting the unit via terminal program
You can use any terminal program for parameterisation.
The manufacturer recommends to use the Hyperterminal program from Microsoft
®
Windows.
1.
Start the Hyperterminal
2.
Select the COM – port of the computer to which
the WZ FSE is connected.
3.
Setting the COM properties
Bits per second: 9600 Baud
Data bits:
8 Bits
Parity:
none
Stop bits:
1 Bit
Flow control:
Xon/Xoff
Xon: ASCII-HEX 0x11
1)
Xoff: ASCII-HEX 0x13
1)
4.
Click the Properties Icon
1) The ASCII-HEX values can be changed via software.
Setting the unit via terminal program