www.fmiproducts.com
125500-01A
17
MODELS LVS18-PP AND LVS24-PP
It is very important to install these logs exactly
as instructed. Do not modify logs. Only use
logs supplied with heater.
1. Place grate into square holes on heater
base as shown in Figure 22.
2. Place front log on burner so that it sits
between grate fingers and burner (see
Figure 22).
3. Place rear log so that locating projections
fit inside mating holes on back of front
log. The log should rest behind the metal
burner (see Figure 22).
4. Add lava rock around base of heater if
desired. Do not place lava rock on log
or burner.
5. During operation, the logs are positioned
correctly when the flame is between the
front and rear logs, but does not touch
any surface on either of the two logs. If
the flame does touch a log, turn the log
set off and reposition the logs in position
as described in steps 1 thru 3.
INSTALLATION
Continued
Figure 22 - Installing Grate and Logs
Rear Log
Grate
Heater Base
Front Log
