background image

Owner & Safety Manual

D. OLVG-315.000.V0

En-7

OUTLAND LIVING - OWNER & SAFETY MANUAL - VERTICAL GARDEN - FERNIE

SECTION 2:

 PLANTER GARDENING

PLASTIC PLANTER BINS

The plastic bins are made from 100% new Polypropylene material 
(PP) and are food safe (BPA free, phthalate free, lead free, mercury 
free). The bins have a 3000hr UV stabilizer to protect the plastic 
from degrading in the outdoors.

The Drain Plugs (Part 13) are made from food safe silicone.

DRAIN HOLES

We listened to the experts (our customers). These bins do not come 
with drainage holes. Not everyone wants drainage holes in their 

planters. But, if you want to add drainage holes, we suggest using a 
5/16” (8mm) drill bit (drill bit not included). This way, if you change 
your mind later on (because you might change your mind!), you 
can use the 5/16” silicone stoppers we have supplied you with to 
plug the holes.

1” WATER RESERVOIR

If you are going to drill a drainage hole, we recommend the hole be 
placed approximately 1-1/8 inch up from the bottom of the bin, on 
the front face of the bin. This will create a 1” water reservoir.

APPROXIMATE DIMENSIONS

25”

632mm

19”

490mm

FRONT

GROUND

SIDE

50”

12

70

m

m

WA

LL

The Vertical Garden frame measures approximately:  
25”W x 19”D x 50”H (632mmW x 490mmD x 1270mmH).

Summary of Contents for OLVG-315













Reviews: