www.fmiproducts.com
125598-01B
12
INSTALLATION
Continued
Figure 20 - Installing Back Left Log
Figure 20A - Installing Back Left Log
Figure 20B - Installing Back Left Log (D-018) Rear View
Figure 21 - Installing Front Left Log
Figure 19B - Installing Right Front Log, Top View
Figure 19C - Installing Right Front Log, Side View
Grate Fingers
Front Left Log
(D-017 or D025)
Burner Tube
Square Grate
Find the back left log (LMF42-SC: D-018 or LMF48-SC:
2.
D026). See Figures 20, 20A, and 20B. Figure 20A shows
how the log must fit against the end of the burner. Figure 20B
shows how the notch in log fits against the vertical portion
of the burner tube. Place this log on the base assembly by
inserting it from the left side as shown in Figure 20. You will
need to twist the log slightly to get it to fit against the burners
properly. It will rest even with the back edge of the pan.
Back Left Log
(D-018 or D026)
Flat Part of Log
Log Notch
Burner Tube
Burner Tube
Log Notch
Vertical Portion of Burner Tube
Find the front left log (LMF42-SC: D017 or LMF48-SC:
3.
D025). See Figures 21, 21A, and 21B. The log has a
rectangular stand off on the bottom that fits against the lip
on the black metal base as shown in figure 21A, page 13.
The bottom of this log has a slot that fits over the second
bar on the grate as shown in Figure 21B, page 13. Place
the log on the base assembly as shown in figures.