www.fmiproducts.com
124465-01B
21
TROUBLESHOOTING
:$51,1*7XUQRIIDQGXQSOXJKHDWHUDQGOHWFRROEHIRUHVHUYLFLQJ
2QO\DTXDOL¿HGVHUYLFHSHUVRQVKRXOGVHUYLFHDQGUHSDLUKHDWHU
&$87,211HYHUXVHDZLUHQHHGOHRUVLPLODUREMHFWWRFOHDQ
2'6SLORW7KLVFDQGDPDJH2'6SLORWXQLW
Note: All troubleshooting items are listed in order of operation.
3266,%/(&$86(
1. Ignitor electrode not con-
nected to ignitor cable
2. Ignitor cable pinched or
ZHW
3. Broken ignitor cable
%DGSLH]RLJQLWRU
5. Ignitor electrode broken
6. Ignitor electrode positioned
ZURQJ
1. Gas supply turned off or
HTXLSPHQW VKXWRII YDOYH
closed
2. Control knob not in PILOT
position
3. Control knob not pressed in
ZKLOHLQ3,/27SRVLWLRQ
$LU LQ JDV OLQHV ZKHQ LQ
-
stalled
5. Depleted gas supply (pro-
pane/LP only)
6. ODS/pilot is clogged
7. Gas regulator setting is
not correct
2%6(59('352%/(0
When control knob is pressed
in and turned to PILOT
WKHUH
is not spark at ODS/pilot
When control knob is pressed
in and turned to PILOT
WKHUH
is spark at ODS/pilot but no
ignition
REMEDY
1. Reconnect ignitor cable
2. Free ignitor cable if pinched
E\DQ\PHWDORUWXELQJ.HHS
ignitor cable dry
3. Replace valve
4. Replace valve
5. Replace pilot
6. Reposition ignitor electrode
1. Turn on gas supply or open
HTXLSPHQWVKXWRIIYDOYH
2. Turn control knob to PILOT
position
3UHVVLQFRQWURONQREZKLOH
in PILOT position
&RQWLQXHKROGLQJGRZQFRQ
-
trol knob. Repeat igniting op-
eration until air is removed
5. Contact local propane/LP
gas company
6. Clean ODS/pilot (see
Clean-
ing and Maintenance,
page
19) or replace ODS/pilot
assembly
7. Replace gas regulator