www.fmiproducts.com
125203-01C
6
Figure 7 - Fan Kit Wiring Diagram
OF FIREPLACE
OUTER WRAPPER
TO
POWER SOURCE
ELECTRICAL COVER PLA
TE
AND STRAIN RELIEF
POWER SOURCE
WIRING (NOT
SUPPLIED)
FIREPLACE
(NOT
SUPPLIED)
WIRE NUT
(3x)
HOUSING
ELECTRICAL
PRE-WIRED RECEPT
ACLE
AND GROUND
CHASSIS
GROUND
FIREPLACE INSTALLATION
Continued
Electrical
Cover Plate
Rocker
Switch
Strain
Relief
Figure 6 - Fan Kit BK2 Electrical Cover
FAN KIT ASSEMBLY (BK2)
A fan kit assembly is preinstalled in this
fireplace. Use of blowers or fans other than
model BK2 voids warranty. Fan is operated by
pressing rocker switch located at lower right
hand corner of fireplace face. Fan kit electri
-
cal connections are made through electrical
cover plate located on side of fireplace as
shown in Figure 6.
Screws
Fan Kit Wiring Instructions
1. Loosen strain relief by turning plastic screw
counterclockwise.
2. Remove electrical cover plate (with strain
relief) from fireplace by removing two sheet
metal screws .
3. Slide power source wiring through strain
relief opening and electrical cover plate
and make all necessary connections
4. Place all wiring connections into electric
housing as shown in Figure 7.
5. Secure electrical cover plate with screws
previously removed.
6. Tighten strain relief plastic screw
Note: Electrical housing and cover plate have
sharp edges. Wear protective gloves.
VENTING INSTALLATION
OUTSIDE AIR KIT
Installation of an outside air kit should be
completed during the rough framing of
fireplace due to nature of its location. The
supplied flex duct measures approximately
10" compressed and up to approximately 36"
extended. Outside combustion air is accessed
through mobile home floor using air kit model
AK6E or a side wall using air kit model AK6-
WE (see
Accessories
on page 18).
Installer may choose either left or right side
mounting to allow for proper wall/rafter
clearances.
For AK6-WE Only:
Construct a 8" x 8" fram
-
ing or opening on exterior wall (see Figure
8, page 7).
For AK6E Only:
The outside air vent is in
-
stalled through a ventilated crawl space (see
Figure 9, page 7).
f i r e - p a r t s . c o m