www.fmiproducts.com
123754-01B
2
ASSEMBLING MANTEL
IMPORTANT: More than one person is required
to lift assembled mantel. Lift mantel by leg
assemblies. Lifting by header or mantel top
could damage mantel.
Use the following illustrations to assemble mantel. Use only
screws provided.
Figure 1 - Installing Base Support
Figure 3 - Installing Mantel Base
Figure 4 - Mantel Top Assembly
Figure 2 - Installing Header
1¼'' Screws
Base Support #10
Base #1
IMPORTANT:
Align mantel left to right on base before installing.
Corner of mantel legs must be flush with back of mantel base
before installation (see Figure 5, page 3). Use a tape measure
to insure accuracy.
IMPORTANT:
Use 2" screws only on top center support. Using
2" screws in any other location will damage mantel.
Header #4
Right Leg
Assembly #2
Left Leg
Assembly #3
1¼'' Screws
Header into
Groove on
Legs
Left Leg
Assembly #3
1¼'' Screws
Base #1
Header
Assembly
Block
Top Center
Support #9
Mantel Top #5
Top Left
Support #7
Top Triangle #6
Top Right
Support #8
2'' Screws
1¼'' Screws
Right Leg
Assembly
#2
