background image

BLQ32SVF AND BLQ36SVF BRICK 

LINER KIT 

INSTALLATION INSTRUCTIONS 

www.fmiproducts.com

36" Fiber Panel Kit BLQ36SVF

IMPORTANT:

 Read entire instruction sheet before installing brick liner

This brick liner accessory is approved for use in VFS32NRK/PRK and VFS36NRK/PRK vent-free gas fireplaces. Do not use brick 

liner accessory in any other fireplace models.

Description
Rear Panel
Right Side Panel
Left Side Panel
Retainer Brackets
#10 Screws

Part No.
126383-04
126383-06
126383-05
116531-01

Qty.

1
1
1
2
4

Description
Rear Panel
Right Side Panel
Left Side Panel
Retainer Brackets
#10 Screws

Part No.
126377-04
126377-06
126377-05
116531-01

Qty.

1
1
1
2
4

The Brick Liner Kit contains the following:
32" Fiber Panel Kit BLQ32SVF

Figure 1 - Removing Fireplace Screen

Screen 

Assembly

Magnet

Bottom Panel 

Assembly

Top Panel 

Assembly

Top Outer Casing

Fireplace 

Hood

1.  To remove the screen push in on the bottom left and right 

corners. The screen should spring forward, lift screen up off 

the hinge brackets.

2.  Remove logs. Remove the three screws that attach the log 

base assembly to the fireplace. There are two on the front of 

the base and the third one is located behind the base. Care-

fully pull the base forward as far as you can (see Figure 2, 

page 2).

 CAUTION: Do not pick up log base assembly by burners. 

This may damage burners. Only pick up base by the grate.

 WARNING: A qualified service person must connect and 

disconnect fireplace to gas supply. Follow all local codes.

3.  Install rear panel (small row of bricks at the top) by angling 

the bottom of the panel into the fireplace and sliding it behind 

the base. Be careful to not scratch the face of the rear panel. 

Stand the panel straight up against the back of the fireplace 

(see Figure 3, page 2).

Tools Required

• 

Phillips Screwdriver

• 

5/16'' Nut Driver

• 

Flashlight

If any of these parts are missing or damaged, contact the dealer 

where you purchase this kit. If they cannot supply original re-

placement parts call FMI PRODUCTS, LLC at 1-866-328-4537 

for information.

IMPORTANT:

 Always handle firebrick panels with two hands.

 WARNING: Turn off, unplug, and let fireplace cool be

-

fore installing brick liner. Only a qualified service person 

should service and repair fireplace.

NOTICE: You must remove logs before installing brick liner.

Reviews: