OPERATORS MANUAL D0003D
BUTTERFLY PLOUGH
Sivu 10
4.3.
Butterfly plough use:
Engage plough to the working machine that floating bar is in the mid position and
plough is in the balanced position (Picture 2).
Picture 2. Floating bar in the mid position
In case the adapter is wrong change adapter and ensure that screws are tightened
well.
Turn wing to the correct angle to get best possible ploughing result.
IMPORTANT
When plough is new take care that air from hydraulic system will be eliminated by
turning cylinders against to the limit stoppers couple of the time.
Adjust support legs in order to blade will get correct height from the surface.
In case of front loader application beam support are recommended.
Working position of plough is correct when frame is in the upright position (Picture
3).