狫
3 Product operations
2.Spot cleaning
Place machine in clean area, press the remote
button on the machine to start with the
placement point spiral sweep.
3.Edge cleaning
Press
button on remote control
to start edge cleaning mode, the robot will start
edge cleaning.
Note
：
1 The current job will be suspended if you press
the auto button, whatever in any cleaning mode.
Press the auto button again the machine will
continue work in the pre-timeout mode.
2 Please keep the machine in the Pause Mode
@ F
mode to the auto mode, then press the auto
button again, it will switch to auto mode.
3.5 Water tank and mop operation
1.Filling water into water tank
1 Open water inlet cap.
2 Fill in water and cover the cap. Water tank capacity is 260ml(appr.).
3 Check whether the tank bottom outlet wool column drops (not drops is normal).
JX Y$ Z
facing the ground.
Summary of Contents for YZ-X1
Page 1: ...INSTRUCTION MANUAL SUJKR ...
