REPLACING SUPER-STRUTS
46
Fluid Management
®
REPLACING
SUPER-
STRUTS
Read all the directions carefully. If you do not feel comfortable
disassembling the mixer or replacing a part, do not attempt the procedure.
Refer to the Parts Section for component identification and location.
REMOVING THE EXTERNAL PANELS
1. Unplug the electrical cord.
2. Remove the top cover and lift it off the mixer.
3. Remove the upper rear cabinet (3-sided piece), front cover, and right and
left side panels, as shown in Figure 6 on page 30.
4. Set the covers to the side of the work area.
REMOVING THE STRUTS
1. Locate the four (4) Super-Struts to be replaced. You will be replacing
the struts on one side at a time.
Figure 17 Locating the Struts
STRUT
STRUT