Flyzone nieport 17, Instruction Manual

Page: 7 / 12

Unpower the model before attempting to reverse the control throws.
Before flight, center rudder control
surface with rudder trim adjustment. Before flight, center elevator control
surface with elevator trim adjustment.
See bottom of page 5
for trim adjustment.
Press and hold one of the corresponding
control surface trim buttons and cycle the
power to reverse any control surface.
RUDDER PREFERENCE:
To move the rudder control function from the right
stick to the left stick, (with the
model unpowered) hold both
sticks to the upper outer
corners while cycling the power.
7
CENTER THE CONTROL SURFACES
REVERSE THE CONTROL THROWS
Keep hands and onlookers clear of propeller during arming and operation.
Throttle control stick is in the low
or minimum position. Return the throttle control stick to
the minimum position. «Beep Beep»
The motor is now armed and the
propeller will operate if the throttle
stick is raised. Raise the throttle control stick
to the maximum or high position.
«Beep»
ARM THE PROPELLER