10
Repairs can be made to the Super Cub by using the following items:
●
Non-butane lighter fluid “Naphtha” (for parts removal and debonding)
●
Thick Foam Safe CA (for parts adhesion), GPMR6072
●
Foam safe CA accelerator, GPMR6035
●
Two sets of needle nose pliers or hemostats, HCAR0625
●
Hobby Knife (#11 blade), RMXR6900
●
Clear tape
●
Hinge tape, DUBQ0916
REPAIRS
Stock No. Description
HCAA6370 Wing
Set
HCAA6371 Tail
Set
HCAA6372 Fuselage
HCAA6373 Landing
Gear
HCAA6374 Pushrods
HCAA6375 Wing
Struts
HCAA6376 Control
Horns
HCAA6377 Spinner
Cone
HCAA6378 Decal
Sheet
HCAA6348 Propeller
HCAA6350 Gear Box Version 2
HCAA6307 Motor
HCAA6309 LiPo
Battery
TACJ2402 TTX402 Micro Tactic 4 channel Tx
TACL0421 TR421 4ch Rx Control Board with Actuators
To order replacement parts for the Super Cub, use the order numbers in the list below. Replacement parts are available
only as listed. Replacement parts are not available from Product Support, but can be purchased from hobby shops or
mail order/Internet order firms. If you need assistance locating a dealer to purchase parts from, contact:
Product Support
Phone: 217-398-0007 Fax:
217-398-7721 E-mail:
REPLACEMENT PARTS
To replace or reinstall the propeller, unpower the
model, then hold the motor shaft with needlenose
pliers and push the propeller back onto the shaft.
Once re-installed, add a drop of CA glue to the
propeller to hold it to the shaft.
PROPELLER REPLACEMENT
Summary of Contents for Micro Super Cub
Page 11: ...11 notes...
Page 12: ......
