4
ASSEMBLE THE TAIL
❏
1. Remove all of the components from the plastic
packaging and lay them out on your work surface.
❏
2. Install the “U” shaped threaded wire into the
plastic
fi n holder
as shown. The longer end of
the wire should be installed at the end of the fi n
holder that has the angled edge.
❏
3. Slide the wires through the holes in the top of
the
horizontal stab
, sliding the plastic fi n holder
fl ush with the horizontal stab.
❏
4. Slide the wire through the holes in the top of
fuselage
, pressing the horizontal stab onto the top
of the fuselage.
❏
5. Install a plastic nut onto each threaded end of
the wire until the horizontal stabilizer fi ts snug to
the fuselage.
❏
6. Install the
fi n
into the fi n holder.
