background image

COMPLETE RTF AIRPLANE

ASSEMBLE ONLY WITH ADULT SUPERVISION

Please read through this instruction booklet to 

THOROUGHLY

 familiarize yourself with the assembly and fl ight characteristics 

of this airplane before beginning to assemble the kit.

Please inspect all parts carefully before starting assembly! If any parts are missing, broken or defective, or if you have any 
questions about the assembly or fl ying of this airplane, please call us at 

(217) 398-8970

 and we’ll be glad to help.

WARRANTY

Hobbico

®

 guarantees this kit to be free from defects in both material and workmanship at the date of purchase. This warranty 

does not cover any component parts damaged by use or modifi cation. 

In no case shall Hobbico’s liability exceed the original cost 

of the purchased kit. 

Further, Hobbico reserves the right to change or modify this warranty without notice.

In that Hobbico has no control over the fi nal assembly, no liability shall be assumed nor accepted for any damage resulting 
from the use by the user of the fi nal user-assembled product. By the act of using the user-assembled product, the user accepts 
all resulting liability.

If the buyers are not prepared to accept the liability associated with the use of this product, they are advised to return this kit 
immediately in new and unused condition to the place of purchase.

To make a warranty claim send the defective part or item to Hobby Services at the address below:

Hobby Services

3002 N. Apollo Dr., Suite 1

Champaign IL 61822 USA

Include a letter stating your name, return shipping address, as much contact information as possible (daytime telephone 
number, fax number, e-mail address), a detailed description of the problem and a photocopy of the purchase receipt. Upon 
receipt of the package the problem will be evaluated as quickly as possible.

Entire Contents © Copyright 2008

Printed in China

HCA27xxMnl01

Please retain this information for future reference.

REQUIRES:

8 “AA” Alkaline Batteries

Summary of Contents for beechcraft staggerwing

















Reviews: