Leave the TTX403
unpowered.
Push down and slide to
open the charger cover.
Illuminated green light indicates charging.
(It may be necessary to cycle the on/off switch
to begin charging.) When the LED goes out,
charging is complete.
Insert battery to charge.
Make sure the battery
plug is oriented properly
before inserting.
6
CHARGE THE 3.7V 250MAH LIPO BATTERY
Do not use the charge feature while flying the Micro B-25 Mitchell!
1. Install the (5) AA batteries in the included 1S charger using the
polarity diagram shown in the battery compartment.
2. Plug the 3.7V battery into the charger as shown. The illuminated
LED indicates charging.
Warning:
Do not connect the battery other than in the
orientation shown!
3. When the LED goes out, charging is complete.
TX-R ONLY:
CHARGE THE 3.7V 250MAH LIPO BATTERY
