FLYWOO Firefly baby quad VISTA HD V1.0
UART1: TBS/R9M/XM+/DSMX/SBUS receiver
UART2: NULL
UART3: VISTA OSD TX/RX
UART4: VISTA SBUS RX (Only use DJI remote control to turn on, and turn off RX1)
UART5: NULL
UART6: NULL
UART7: NULL
3/ Receiver binding
TBS NANO 915:
When the USB is connected, the green light of the receiver flashes, and then bind
according to the picture operation.
https://www.youtube.com/watch?v=-iNkVcOLITM&ab_channel=Danimal3D
ELRS 2.4G RX:
Bind procedure:
- Supply power to the EL24E/EL24P rx, wait until the LED on the RX is off, immediately
turn off the power, and then repeat again the above steps. When the RX is powered on
