FLYWOO LR4 QUAD ANALOG V1.0
2/ BF Configurator will display to enter DFU mode. If it does not enter DFU mode, it may
be that the driver is not installed. The driver can be installed using IMPULSE RC software
Driver software:
https://impulserc.blob.core.windows.net/utilities/ImpulseRC_Driver_Fixer.exe
3/ Then load the local HEX firmware and wait for the flashing to complete. A green
progress bar is displayed to indicate completion, and DFU will become a COM port
4/ After the connection is entered, it is a blank interface, you need to write CLI
