After switching on the device using the main switch (ref. K), wait about two minutes until the coffee
groups reach the ideal operating temperature and are ready for use.
Once this time has elapsed, operate one or both of the pod-press levers (ref. F), lifting them upwards.
Insert a pod in one of the appropriate seats and gently lower the lever until it clicks into place.
Place a cup under the corresponding coffee spout (ref. B) and press one of the three keys (short coffee,
long coffee or manual start/stop) on the corresponding control panel located at the top of the machine
(ref. D). For example, if you want to make a short coffee using spout B1, you will have to press key 0 on the
left-hand switch panel:
If instead you want to make a long coffee using spout B2, you will have to press key 4 on the right-hand
control panel. Once you have pressed one of the coffee dispensing keys, you have to wait about three
seconds for the coffee to flow out. Once the programmed dose has been reached, the coffee dispensing
stops automatically (except when pressing keys 2 or 5). If you want to stop the dispensing earlier, simply
press the same key again. Once the coffee has been dispensed, we recommend removing the pod to
prevent it from sticking as it dries.
It is important to empty the drip trays (ref. A) after dispensing not more than 30 cups of coffee.
HOW TO MAKE COFFEE
17
Turn on the machine by pressing the general power switch (ref. K) located on the lower right-hand side of
the machine. This switch only activates the coffee brewing units and the additional electric cup warmer
(optional); to also use the steam boiler, it is necessary to use the dedicated switch (ref. C).
POWER ON
B1
B2
0
3
1
4
2
5
Please remember to use only pods provided by your Supplier. The use of different
pods from those for which the coffee machine was designed may not guarantee
the same dispensing quality.
