4. Disassembly
Lay the board on the ground with the top
facing upwards.
In order to save space, shorten the paddle
to the minimum length. To take the paddle
apart, push the spring pin in and pull the two
pieces apart.
Open the check valve. Push it in and turn 90
degrees counterclockwise.
Starting at the bow (tip), fold the board up
in small and thight folds.
In order to protect the fins, at the end, fold the
stern (tail) in the opposite direction.
To achieve smaller pack dimensions,
remove the three fins..
Close the check valve by pushing it in and
turning 90 degrees clockwise. Close the
cap once again.
Lay the compression band around the
folded-up SUP board and pull it tightly. Pack
the secured board and lay the paddle (and
accessories) inside the bag.
Everything is packed - well done!
ENGLISH
!