Website
49
Used to set up the up, down, left and right shortcut screen
sliding functions of the mainmenu. Users can customize the
screen sliding menu according to their requirements.
This function is used to set the level of the shift switch SWE-
SWH, and the 2 and 3 levels can be selected.
Used to calibrate two sticks, three knobs and two shift
levers.
7.22.9 Screen Quick Access
7.22.10 Switch Setting
7.22.11 Calibration
Function Settings:
Function Settings:
Function Settings:
1. Enter
Screen quick access
setting menu
.
2. Tap an appropriate item you want to set to enter.
3. Tap a function, then click to return.
1. Enter
Switch setting
setting menu
.
2. Tap the box next to the switch to select 2 levels or 3 levels,
then click to return.
1. Enter
Calibration
setting menu
.
2. According to the prompt in screen, toggle the sticks, knobs
or the lever to their Max/Min travel range.
3. Click to return. After the calibration is successful, click
Yes
to exit.
Note: If calibration fails, click
Yes
to exit calibration, and click
No
to start recalibration.
