25
5. Remove the spring hook assembly carefully.
8. Carefully insert the back cover wiring plug into the
motherboard, re-close the transmitter back cover,
and tighten the screws.
6. Place the plate assembly back in its original
position, then secure it with the original 4 screws.
7. Put the bracket to the position which is shown
above, then secrew it using the screws. You can
install the setback spring or non-setback spring
here. If the screws are too tight or too loose, this
may bring different hand handle.
5
6
7
8
Pay attention to the bending
direction of the bracket.
