FS-A8S
接收机 Receiver
http://www.flysky-cn.com
Copyright ©2021Flysky Technology co., ltd
注意事项：
•
使用前必须确保本产品与模型安装正确，否则可能导致模型发生严重损坏。
•
关闭时，请务必先关闭接收机电源，然后关闭发射机。如果关闭发射机电源时接收机仍然在工作，将有可能导致遥控设备
失控或者引擎继续工作而引发事故。
•
确保接收机安装在远离电机，电子调速器或电子噪声过多的区域。
•
接收机天线需远离导电材料，例如金属棒和碳物质。为了避免影响正常工作，请确保接收机天线和导电材料之间至少有1厘
米以上的距离。
•
准备过程中，请勿连接接收机电源，避免造成不必要的损失。
Attention:
•
Make sure the product is installed and calibrated correctly, failure to do so may result in serious injury.
•
Make sure the receiver's battery is disconnected before turning off the transmitter, failure to do so may lead to unintended
operation or loss of control.
•
Make sure the receiver is mounted away from motors, electronic speed controllers or any device that emits excessive electrical
noise.
•
Keep the receiver's antenna at least 1cm away from conductive materials such as carbon or metal.
•
Do not power on the receiver during the setup process to prevent loss of control.