5
Flight Preparation
Motor Rotation Direction Check
Diagram 1
1. Turn on the RC transmitter.
2. Connected the power of the aircraft, wait for self check(at self check completion, the green indicated light
of the flight control is on; the blue light flickers from fastly to slowly that means self check finished), Do Not
move the aircraft during this process.
3. Please make sure the normal connection between the RC transmitter and the aircraft (RC receive and RC
transmit connection fails, the "STATUS" red indicator light on the receiver is on; otherwise, it is off).
4. Unlock the aircraft, check the motor rotation direction (Diagram 1). Please make sure that the motor
rotation direction is correct before installing the propellers, otherwise it will cause the aircraft to crash,
causing damage.
Diagram 2
Diagram 3
Aircraft unlock and lock
Mode 2--Unlock (Diagram2) and Lock (Diagram3)
1. Unlock: pull the left stick to the bottom on the right corner for 2 seconds, the blue light of the flight control
system flickers from slowly to fastly,that means unlock successfully, lightly push the throttle, the motor
starts to rotate. (Diagram2)
2. Automatic lock: the aircraft has automatic lock function, keep the lowest throttle for 5 seconds, the aircraft
will automatically lock.
3. Manual locking: pull the left stick to the bottom on the left corner for 2 seconds, the blue light of the flight
control system is on for 2 seconds, then flickers slowly ,that means lock successfully. (Diagram3)
