manualshive.com logo in svg

Flyron FN-BC04, User Manual, Page: 13 / 17

Share
Download
Flyron FN-BC04 User Manual Download Page 13

www.flyrontech.com

E-mail: [email protected]

Flyron Technology Co., Ltd.

FN-BC04 MP3 Sound Module with 10W Amplifier

13

Repeatedly play 3

rd

track

7E FF 06 08 00 00 03 xx xx EF

During single repeat playback, you can still normally execute the operations Play/Pause, Previous, Next, /-
and repeat playback. Users can specify single track playback or send the stop command to turn off single repeat
playback status.

4.6.4 Specify playback of a device

Specify playback of SD card

7E FF 06 09 00 00 02 FE F0 EF

Specify playback of SPI flash

7E FF 06 09 00 00 04 FE EE EF

1)

The module supports two types of playback devices (micro SD card and on-board SPI flash).

2) It automatically enters into the standby status after specifying a device, waiting for MCU to specify a track

to play. It takes about 200ms from specifying device to the module finishes initialization of file system.
Please wait for 200ms and then send the specified command to play a track.

4.6.5. Set sleep mode, awake from sleep and reset

Set sleep mode

7E FF 06 0A 00 00 00 FE F1 EF

Awake from sleep

7E FF 06 0B 00 0 0 00 FE F0 EF

Reset

7E FF 06 0C 00 00 00 FE EF EF

1) After set the module enter into sleep mode, there is also other two ways other than sending the command

to awake the module.

a.

Specify playback of the storage device, either SPI flash or SD card.

b.

Pull out the storage device and re-plug it in.

2) The reset is a soft reset. The reset time is 5-8 seconds. This allows the reset command under any status.

Note: When the module enters into the sleep mode, the standby power consumption is about 10mA. If users are very strict

to the power consumption, you can use a MOS and a transistor to control power supply of the module. It is possible to cut

off the power supply completely when standby is not necessary. Please refer to the schematic as below.

Summary of Contents for FN-BC04


















Reviews:

No comments