background image

EC Declaration of Conformity

Husqvarna AB, S-561 82, Huskvarna, Sweden
Declare under our sole responsibility that the product(s);
Designation............................Lawnmower
Designation of Type(s)...........UG360
Identification of Series............See Product Rating Label
Year of Construction...............See Product Rating Label
Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC,  2004/108/EC,  2000/14/EC, 2011/65/EU
based on the following EU harmonized standards applied:
EN60335-1, EN60335-2-77, EN50366, EN55014-1, EN61000-3-2, EN61000-3-3
The maximum A weighted sound pressure level L

pA

at the operator’s position, measured according to EN60335-2-77 is given in

the table.
The maximum hand / arm vibration weighted value ah measured according to EN ISO 20643 on a sample of the above prod-

uct(s) is given in the table.
2000/14/EC: The Measured Sound Power L

WA

& Guaranteed Sound Power L

WA

values are according to the tabulated figures.

Conformity Assessment Procedure.........Annex VI
Notified Body...........................................Intertek, Cleeve Road, Leatherhead, Surrey, KT22 7SB, England
Newton Aycliffe  22/10/2013
P. Lameli
Chief Technical Officer
Keeper of technical documentation

Type
Width of Cut (cm)
Speed of Rotation of Cutting Device (rpm)

Power (kW)
Measured Sound Power L

WA

(dB(A))

Guaranteed Sound Power L

WA

(dB(A))

Sound pressure L

pA

(dB(A))

Uncertainty K

pA

(dB(A))

Hand / arm vibration a

h

(m/s

2

)

Uncertainty K

ah

(m/s

2

)

Weight (Kg)

UG360

36

3400

1.8

94
96

82.7

2.5

1.88

1.5

12

Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.  Copy-

right © 2013 Flymo S.A. All rights reserved.  Flymo® and other product and feature names are registered or unregistered trademarks of Flymo S.A.

Husqvarna AB.

S-561 82

Huskvarna

Sweden

5848745-01

Summary of Contents for UltraGlide










Reviews: