5100005-01
Husqvarna UK Ltd
Aycliffe Industrial Park
NEWTON AYCLIFFE
Co.Durham DL5 6UP
ENGLAND
Telephone - 01325 302302 Fax - 01325 310339
Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice.
Service Recommendations
1. We strongly recommend that your product is serviced at least
every twelve months, more often in a professional application.
2. Always use genuine Flymo Spare Parts.
3. Prepacked spares are available from most Flymo Approved
Service Dealers (See enclosed leaflet in product).
4. Your product is uniquely identified by a silver and
black product rating label
5. If you have a problem with your machine contact your local
Approved Service Centre ensuring you have full details of
your product as described on the product rating label.
6.
Should it be necessary for work to be carried out
by your Service Centre, it is important to take
your complete machine including cable and any
extension cables used.
A network of specialist dealers can be found in your local Yel-
low Pages. To obtain service on your Flymo product simply
telephone or visit your local Service Centre. Should you re-
quire service under the terms of our guarantee the Service
Centre will require proof of purchase.
All of the centres listed stock genuine Flymo Spare Parts.
NOTE: Our Service Repairers act on their own behalf
and are not empowered to commit or legally bind
Husqvarna UK Ltd in any manner whatsoever.
EC Declaration of Conformity
Husqvarna UK Ltd., Aycliffe Industrial Park
Newton Aycliffe, Co. Durham, DL5 6UP, England
Declare under our sole responsibility that the product(s);
Category........................................
Electric Leaf Collector
Model(s).........................................
TGV2700
Identification of Series...................
See Product Rating Label
Year of Construction......................
See Product Rating Label
Complies with the essential requirements & provisions of the following EC Directives:
98/37/EC (until 31.12.09), 2006/42/EC (from 01.01.10), 2004/108/EC, 2000/14/EC
based on the following standards applied:
IEC60335-1, IEC60335-2-100, EN50366, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3
The maximum A weighted sound pressure level L
pA
at the operatorʼs position, recorded on a sample of the above
product(s) corresponds to the
Level
given in the table.
The maximum hand / arm vibration weighted value measured according to EN ISO 5349 on a sample of the above
product(s) corresponds to the
Value
given in the table.
2000/14/EC: The Measured Sound Power L
WA
& Guaranteed Sound Power L
WA
values are according to the tabulated
figures.
Conformity Assessment Procedure.................. Annex VI
Notified Body.................................................... Intertek, Cleeve Road
Leatherhead, Surrey
KT22 7SB, England
Newton Aycliffe, 06/05/2008
M. Bowden,
Research & Development Director
Husqvarna UK Ltd.
TGV2700
17,000
2.7
99
100
85.7
2.84
4.7
Type
Speed of Rotation of Cutting Device (RPM)
Power (kW)
Measured Sound Power LWA (dB(A))
Guaranteed Sound Power LWA (dB(A))
Level
(dB(A))
Value
(m/s
2
)
Weight (Kg)
Environmental Information
•
Awareness of the environment must be considered
when disposing of ʻend-of-lifeʼ product.
•
If necessary, contact your local authority for disposal
information.
The symbol on the product or on its packaging indicates
that this product may not be treated as household waste. In-
stead it shall be handed over to the applicable collection point for
the recycling of electrical and electronic equipment. By ensuring
this product is disposed of correctly, you will help prevent poten-
tial negative consequences for the environment and human
health, which could otherwise be caused by inappropriate waste
handling of this product. For more detailed information about re-
cycling of this product, please contact your local council office,
your household waste disposal service or the shop where you
purchased the product.