Flymo Power Trim Lawn Trimmer User Manual Download Page 2

Carton Contents

IMPORTANT !

Please check the contents of the carton are correct 

BEFORE

assembling your new Flymo product.

IF ANY PARTS ARE MISSING CONTACT:-

Husqvarna Outdoor Products Customer Service Department direct
Telephone : 01325 300303,  Fax : 01325 318193

Safety

General

1. Never allow children or people unfamiliar with these

instructions to use the trimmer. Local regulations
may restrict the age of the operator.

2. Only use the trimmer in the manner and for the

functions described in these instructions.

3. Never operate the trimmer when you are tired, ill or

under the influence of alcohol, drugs or medicine.

4. The operator or user is responsible for accidents or

hazards occurring to other people or their property.

Electrical

1. The British Standards Institute recommend the use

of a Residual Current Device (R.C.D.) with a tripping
current of not more than 30mA.  Even with a R.C.D.
installed 100% safety cannot be guaranteed and
safe working practice must be followed at all times.
Check your R.C.D. every time you use it.

2. Before use, examine cable for damage.  If there are

signs of damage or ageing, it must be replaced by
the manufacturers service agent or a similar quali-
fied person to avoid hazard.

If not used properly this trimmer can be dangerous!  This trimmer can cause serious injury to the opera-
tor and others, the warnings and safety instructions must be followed to ensure reasonable safety and
efficiency in using this trimmer.  The operator is responsible for following the warning and safety instruc-
tions in this manual and on the trimmer. 

Explanation of Symbols on the Power Trim

Warning

Read the user instructions carefully to
make sure you understand all the con-
trols and what they do.

Keep others, including children, pets and
bystanders outside the 10 metre hazard
zone. Stop the trimmer immediately if you
are approached.

The use of eye protection is recommend-
ed to protect against objects thrown by
the cutting line.

To avoid the possibility of electric shock,
do not use in damp or wet conditions.

Switch off! Remove plug from mains
before adjusting, cleaning or if cable is
entangled or damaged.

Warning

: The cutting line continues to rotate after the

machine has been switched off.

360º

10m

Switch Handle

Electric Cable with
moulded on plug

Guard

Instruction
Manual

Tube

Steady Handle

Trimmer Head

Summary of Contents for Power Trim Lawn Trimmer










Reviews: