A1
1. Attach the wheel and washer onto the axle
(A1)
ensuring the wheel is secured with the retaining
pin
(A2)
. Attach the hub cap, ensuring the clips
and holes are aligned before securing into place.
Repeat on the other side.
2. Using the spanner provided, attach the support
foot with the support foot bolt, washer and nut as
illustrated in
pic. A3
. Repeat on the other side.
3. Attach the cable hook to the product as illustrat-
ed in
pic A4
. Repeat for the other three cable
hooks. This enables the mains cable to be
wrapped around the product for storage and
transportation
(C)
.
Preparation
1. Unfold the product by sliding the catch
(B1)
and
unfolding through 90
o
(B2)
until it locks into the
operating position.
2. The product can be transported to the required
location by holding the transport handle
(C1)
and
tilting it onto the wheels. as illustrated in
pic C
.
3. Before operating the product, ensure the collec-
tion box is correctly located and the Interlock
Switch
(D1)
is securely in place. The product will
not start if the Interlock Switch is not located cor-
rectly.
Assembly
A3
A2
B
C
90
o
D
1
1
1
2
A4
