Flymo Minitrim Auto ST MAST23 Original Instructions Manual Download Page 8

5101028-04

If any part is found to be defective due to faulty manufacture within
the guarantee period, Husqvarna UK Ltd., through its Authorised
Service Repairers will effect the repair or replacement to the cus-
tomer free of charge providing:
(a) The fault is reported directly to the Authorised Repairer.
(b) Proof of purchase is provided.
(c) The fault is not caused by misuse, neglect or faulty adjustment

by the user.

(d) The failure has not occurred through fair wear and tear.
(e) The machine has not been serviced or repaired, taken apart or

tampered with by any person not authorised by Husqvarna UK Ltd.

(f)  The machine has not been used for hire.
(g) The machine is owned by the original purchaser.
(h) The machine has not been used commercially.
*

This guarantee is additional to, and in no way diminishes the
customers statutory rights.

Failures due to the following are not covered, therefore it is important
that you read the instructions contained in this Operator's Manual
and understand how to operate and maintain your machine:

Failures not covered by guarantee
*

Replacing Nylon Line.

*

Failures as a result of not reporting an initial fault.

*

Failures as a result of sudden impact.

*

Failures as a result of not using the product in accordance with
the instructions and recommendations contained in this Opera-
tor's Manual.

*

Machines used for hire are not covered by this guarantee.

*

The following items listed are considered as wearing parts and
their life is dependent on regular maintenance and are, there-
fore not normally subject to a valid warranty claim: Nylon Line,
Spool and Line, Electric Mains Cable.

*

Caution!
Husqvarna UK Ltd. does not accept liability under the warranty
for defects caused in whole or part, directly or indirectly by the
fitting of replacement parts or additional parts that are not either
manufactured or approved by Husqvarna UK Ltd., or by the ma-
chine having been modified in any way.

Guarantee & Guarantee Policy

Service Recommendations

Your product is uniquely identified by a silver and black product rating label.

We strongly recommend that your product is serviced at least every twelve months, more often in a professional application.

EC Declaration of Conformity

Husqvarna AB, S-561 82, Huskvarna, Sweden

Declare under our sole responsibility that the product(s);

Designation............................Lawn Trimmer
Designation of Type(s)...........MST21, MAST23, MAXT25
Identification of Series............See Product Rating Label
Year of Construction..............See Product Rating Label

Conforms to the essential requirements & provisions of the following EC Directives:
2006/42/EC, 2004/108/EC,  2000/14/EC,  2011/65/EU
based on the following EU harmonized standards applied:
EN60335-1, EN60335-2-91, EN50366, EN55014-1, EN61000-3-2, EN61000-3-3

The maximum A weighted sound pressure level L

pA

at the operator’s position, measured according to EN60335-2-91 is

given in the table.

The maximum hand / arm vibration weighted value ah measured according to EN ISO 20643 on a sample of the above

product(s) is given in the table.

2000/14/EC: The Measured Sound Power L

WA

& Guaranteed Sound Power L

WA

values are according to the tabulated

figures.
Conformity Assessment Procedure...............

Annex VI

Notified Body.................................................

Intertek, Cleeve Road
Leatherhead, Surrey
KT22 7SB, England

Ulm  16/01/2013
A. Rangert
Global R & D Director - Hand held
Keeper of technical documentation

Type

Width of Cut (cm)

Speed of Rotation of Cutting Device (rpm)

Power (kW)

Measured Sound Power L

WA

(dB(A))

Guaranteed Sound Power L

WA

(dB(A))

Sound pressure

L

pA

(dB(A))

Uncertainty

K

pA

(dB(A))

Hand / arm vibration

a

h

(m/s

2

)

Uncertainty 

K

ah

(m/s

2

)

Weight (Kg)

MST21

21

12,000

0.23

90

96

77.4

2.5

4.59

1.5

2.0

MAST23

23

10,500

0.25

90

96

82.9

2.5

4.85

1.5

2.3

MAXT25

25

10,500

0.30

88

96

82.3

2.5

4.5

1.5

2.3

Husqvarna AB

S-561 82

Huskvarna

Sweden

Our policy of continuous improvement means that the specification of products may be altered from time to time without prior notice. 

Copyright © 2013 Flymo S.A. All rights reserved.  Flymo® and other product and feature names are registered or unregistered trademarks

of Flymo S.A.

Summary of Contents for Minitrim Auto ST MAST23









Reviews: