6
Fails To Operate
1. Is the power turned on?
2. Is the fully assembled debris bag correctly fitted to the
product?
3. Check the fuse in the plug, if blown replace.
4. Fuse continues to blow?
Immediately disconnect from the mains electricity
supply and consult your local Service
Centre/Dealer/Distributor
Poor Blowing
1. The air inlets are blocked, clean all air inlets.
2. Mode indicator not in the right position?
3. If poor blowing persists?
Immediately disconnect from the mains electricity
supply and consult your local Service
Centre/Dealer/Distributor
Poor Vacuum/Jet Vacuum
1. The air inlets are blocked, clean all air inlets.
2. Mode indicator not in the right position?
3. If poor vacuuming persists?
Immediately disconnect from the mains electricity
supply and consult your local Service
Centre/Dealer/Distributor
Excessive Vibration
1. The cutting line is damaged - replace with new cutting
line.
2. Ensure the fully assembled debris bag is correctly
fitted to the product.
3. If excessive vibration persists?
Immediately disconnect from the mains electricity
supply and consult your local Service
Centre/Dealer/Distributor
Poor Shredding
1. The cutting line is damaged - replace with new cutting
line.
2. TO PROLONG CUTTING LINE LIFE
The Gardenvac has been designed to shred
leaves. If collecting large amounts of any other de-
bris - remove the cutting line.
3. If poor shredding persists?
Immediately disconnect from the mains electricity
supply and consult your local Service
Centre/Dealer/Distributor
Service Recommendations
1. We strongly recommend that your product is serv-
iced at least every twelve months, more often in a
professional application.
2. Always use genuine Flymo Spare Parts.
3. Prepacked spares are available from most Husq-
varna UK Ltd. stockists.
4. Your product is uniquely identified by a silver and
black product rating label
5. If you have a problem with your machine contact
your local Approved Service Centre ensuring you
have full details of your product as described on
the product rating label.
6. Should it be necessary for work to be carried out
by your Service Centre, it is important to take your
complete machine including cable and any exten-
sion cables used.
A network of specialist dealers can be found in your
local Yellow Pages. To obtain service on your Flymo
product simply telephone or visit your local Service
Centre. Should you require service under the terms
of our guarantee the Service Centre will require proof
of purchase.
All of the centres listed stock genuine Flymo Spare
Parts.
NOTE: Our Service Repairers act on their own behalf
and are not empowered to commit or legally bind
Husqvarna UK Ltd. in any manner whatsoever.
Environmental Information
Husqvarna UK Ltd. are manufactured under an Environmental Management System (ISO 14001) using, where
practical, components manufactured in the most environmentally responsible manner, according to company
procedures, and with the potential for recycling at the end of the products’ life.
• Packaging is recyclable and plastic components have been labelled (where practical) for categorised recy-
cling.
• Awareness of the environment must be considered when disposing of ‘end-of-life’ product.
• If necessary, contact your local authority for disposal information.
The symbol on the product or on its packaging indicates that this product may not be treated as household
waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and elec-
tronic equipment.
By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste handling of this
product.
For more detailed information about recycling of this product, please contact your local council office, your
household waste disposal service or the shop where you purchased the product.
Fault Finding Hints
Replacement Parts
Cutting lines
Reference no.:
FLY024
Part no.:
513859390