English - 45
6. MENU FUNCTIONS
Alarm
This function means that an alarm sounds if the PIN
code is not entered within 10 seconds after the
STOP
button has been pressed or the robotic lawnmower has
been lifted up for any reason. A ticking noise indicates
that the PIN code must be entered to prevent triggering
the alarm. The alarm can be turned off at any time by
entering the correct PIN code.
New loop signal
The loop signal is randomly selected to create a
unique link between the robotic lawnmower and the
charging station. In rare cases, there may be a need
to generate a new signal, for instance if two adjacent
installations have a very similar signal.
•
Place the robotic lawnmower in the charging
station.
•
Select
New loop signal
in the menu and
press
OK
.
6.5 Settings
The following operating settings are available via this
selection in the main menu.
•
Time & Date
to set the current time and date, and the required
time and date format.
•
Language
to select the menu language.
•
Backlight
to select whether the display is lit while mowing
or not.
•
Remote start
to determine how often the robotic lawnmower
must follow the guide wire out from the charging
station.
•
Calibrate guide
to test if the robotic lawnmower can follow the
guide wire out from the charging station.
•
Reset user settings
to reset the robotic lawnmower to the settings it
had when it left the factory.
Change PIN code
Security level
New loop signal
Timer
Installation
Security
Settings
Time & Date
Language
Backlight
Remote start
Calibrate guide
Reset user settings
