Figure 4.6: Task Delay
To delay a task, when in the Task Delay menu simply push the ENTER button when the Task Delay is
selected (Figure
4.6
). Then using UP, and DOWN buttons set the number of minutes to delay. Finally,
push the ENTER button to conrm.
4.3 TaskNavigator
This function is useful to override the automatic task navigation provided by the LIVE SD , and should
only be used if for some reason a mistake was made during the creation of the task.
When this option is selected the LIVE SD displays the task list. Using the UP and DOWN buttons the
desired waypoint can be selected. Pressing the ENTER button will cause navigation to be resumed to the
selected waypoint. Route navigation will then continue in the sequence displayed in the task menu.
Figure 4.7: Task Navigator
When entering into the Task Navigator menu, all of the route points are shown as both the short name
and long name (Figure
4.7
). Selecting any of the routepoints will show a navigation wheel in the lower
part of the screen showing the direction to that point along with the distance to the waypoint cylinder.
The distance shown is the Distance to Line, which is the closest point on the cylinder to where the pilot
is. This is not necessarily the optimum point on the cylinder.
The Start waypoint will be grayed since it is not possible to navigate to a start. Pressing the menu button
will get you back to the ight screen without any change to the navigation.
28
All manuals and user guides at all-guides.com
