LED Indicator
Situations
The red and green lights
flash alternately when plug
the clamps into car jump starter
Automatic identification status, ready to work
Press the starter button in your car to start your vehicle in 30s,
The light turns red after 30s, you need to disconnect the clamps and
reconnect
The green light stays on and
buzzer beeps
1. Short circuit protection
2. Reverse protection
--- disconnect the clamps and reconnect the clamps with car battery
and car jump starter port
The voltage of the jump starter is too low, please recharge it in time
The red light stays on and
buzzer keep beeping
The green light flashes slowly
In any of following situations, the smart clamp turns protection on.
EN
10
