Flylight Airsports Skyranger Swift, Operator'S Manual

Page: 25 / 56

Skyranger Swift Operators Manual (issue 3)
25
7. Rigging and De-rigging
7.1 To attach the wings:
 With the wing tip raised to approximately the rigged height, slide
the wing root into place to engage in the root brackets

Insert the wing root fixing bolts
 Attach the lift struts and jury struts

Tighten all attachment bolts and insert safety rings

Connect flap pushrod
 Connect Pitot line

Connect aileron cables

Ensure aileron cables are crossed as per placard in cockpit on
central upright.

Final inspection of all nuts and bolts, cable routing and
attachments
7.2 To remove the wings:

Disconnect aileron cables

Disconnect pitot line
 Disconnect flap pushrods

Remove safety rings from lift strut bolts (if fitted)

Remove nuts from lift strut bolts and spar bolts
 Support wing tip

Remove lift struts

Remove spar bolts (wing root)
 Slide wing outwards until spar is clear of cabin.
7.3 Tail
The tail plane is not designed to be a regular de-rig item, however it
may be removed for long distance trailering, as may the rudder. When
re assembling these parts replace all Nyloc nuts that were removed for
disassembly.