Nynja Operators Manual issue 2 (E) 1.2
27
7.
Rigging and De-rigging
7.1 To attach the wings to the Nynja:
With the wing tip raised to approximately the rigged height, slide
the wing root into place to engage in the root brackets
Insert the wing root fixing bolts
Attach the lift struts and jury struts
Tighten all attachment bolts and insert safety rings
Connect flap pushrod
Connect Pitot line
Connect aileron cables
Ensure aileron cables are crossed as per placard in cockpit on
central upright.
Final inspection of all nuts and bolts, cable routing and
attachments
7.2 To remove the wings from the Nynja:
Disconnect aileron cables
Disconnect pitot line
Disconnect flap pushrods
Remove safety rings from lift strut bolts (if fitted)
Remove nuts from lift strut bolts and spar bolts
Support wing tip
Remove lift struts
Remove spar bolts (wing root)
Slide wing outwards until spar is clear of cabin.
7.3 Tail
The tail plane is not designed to be a regular de-rig item, however it
may be removed for long distance trailering, as may the rudder. When
re assembling these parts replace all Nyloc nuts that were removed for
disassembly.
