Steel wire T-bone 3x20mm
Steel wire hinge pin 3x12mm
Lubricate the tube with grease
Brass tube 5x4.1x65mm
Slide the remaining axle member parts in place and glue assembly,
make sure to have the parts aligned correctly!
Steel wire lower folding arm reinforcement 3x41mm.
Slide the first two axle member
parts on the suspension arms
Pre bend 4mm landing gear part
3d printed lower part
Position the previously build folding arm
3d printed upper part
6
Summary of Contents for Goose V2
